Results 1 to 9 of 9

Thread: WENT TO THE TRACK

  1. #1
    JASONS
    Guest JASONS's Avatar

    Post

    13.41 best time I could get for the day 60ft 1.99 cant figure out what to lauch at , or tire pressure 20psi for air pressure 14,8 MT slicks and lauching at 3000rpm I thought Iwould 60ft of 1.8 that must be ona perfect day lauching and tire psi advice wanted

  2. #2
    Inactive Member SC HYBRID's Avatar
    Join Date
    March 13th, 2000
    Posts
    505
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    launching @ 3000 ?????
    launch that shit @ 6500-7000,thats what i launch at.just dont drop the HAMMA'
    feather it slightly.......
    you gain at least .2-.3 seconds.

    ------------------
    HYBRID B18C1,JRSC @ 12PSI
    TYPE R EXHAUST CAM
    12.7 @ 109 mph
    new addition..PORTED/POLISHED HEAD
    no new times with headwork yet......

  3. #3
    Inactive Member strng1dah's Avatar
    Join Date
    September 21st, 1999
    Posts
    275
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    I launch at 3000 on street tires, you should be able to launch higher than that on Slicks.

    Still a damned nice time though

  4. #4
    Inactive Member reddelsol's Avatar
    Join Date
    March 31st, 2000
    Posts
    447
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Question

    I got a question I keep forgeting to ask that relates to this.

    Checking tire pressure,

    Slicks -- most likely you're checking the first pressure cold and going from there

    Street tires -- more likely, unless you've let it sit for a couple hours are being adjusted from a warmed tire.

    so, when someone says (for instance) slicks are running best at about 20psi -- that's after they've run them down the track and checked the pressure again??

    not a big deal -- just asking though

  5. #5
    JASONS
    Guest JASONS's Avatar

    Post

    are you serious about 6000 for a lauch Ill burn the slicks up

  6. #6
    JASONS
    Guest JASONS's Avatar

    Post

    are you serious about 6000 for a lauch Ill burn the slicks up

  7. #7
    JASONS
    Guest JASONS's Avatar

    Post

    thanks for the info

  8. #8
    Inactive Member 12SecGSR's Avatar
    Join Date
    May 20th, 2000
    Posts
    236
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    I use 15x8 slicks, but I launch between 7000-8000 and slip the clutch out... the slicks spin a little, but it shoots off the line, I pull a 1.7 60 ft. like that...

    I run my pressures at 13 in the left and 12 in the right... I experiment with diferent pressures a lot, I may change a 1 or 2 psi each run, depending on how they are hooing...

    I never run more than 15 psi... 20 psi is way to high for a slick... dont be afraid to run them flat, that is what they are designed for... some of the pro's run less than 5 psi... and luckily in a fwd car it really isnt hard to control even at 120mph... I always run about 1 psi less in the right tire, because for some strange reason it pulls hard left if I dont, and I have to fight it the whole way down, that isnt good for et's!

    good luck!
    -Dan

  9. #9
    JASONS
    Guest JASONS's Avatar

    Post

    watched the video of my run I did a cool burn out and hit 13.41 at 106mph

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •